Page tree
Skip to end of metadata
Go to start of metadata

The course repo data can be accessed off campus from university owned or personal hardware.  In order to access the data, you will first have to install and configure the VPN Anyconnect client.

  1. Download and install the Cisco VPN AnyConnect client.  Instructions are located at:http://www.uww.edu/icit/services/remote-access .
  2. Make sure the VPN Client is launched and connected.  You can verify this be checking for the "connected" icon in the system tray.
  3. Once connected to the Cisco VPN AnyConnect icon:
  4. Open "File Explorer" and select "This PC"
  5. Click on the "Computer" menu at the top, and choose "Map network drive"

  6. Choose Drive U: and for the folder enter: \\data.uww.edu\udrive
  7. Check the "Connect using different credentials" box and click on "Finish"
  8. A network credentials box will appear.  Center your UW-W Net-ID and Password.  For the username, enter your UW-W Net-ID in the following format: uww\net-id (If your username is WarhawkWJ13, you would enter: uww\Warhawkwj13 )
  9. Click on "OK" to continue.  You should now have a new drive mapped where you can access your data.
  10. Remember, you'll need to be connected to the Cisco VPN AnyConnect Client in order for this to work.